Conehead Flash Bugger Step by Step
Conehead Flash Bugger
This woolly bugger variation features a conehead for weight and a little more flash than the standard woolly bugger. Deadly for anything in fresh and can be tied in a bunch of different sizes.
![](https://cdn.shopify.com/s/files/1/0713/6115/files/strippersglitter_-_13_of_13_480x480.jpg?v=1707847048)
Recipe
Hook - Long shank streamer hook
Thread - 3/0 or large, 140 denier streamer thread
Tail - Angel Hair with marabou fibers as a vail
Body - Angel Hair wrapped up the body with saddle hackle palmered forward
Rib - Thread crossed wrapped over hackle
Collar - UV Red Ice Dub
![](https://cdn.shopify.com/s/files/1/0713/6115/files/strippersglitter_-_1_of_13_480x480.jpg?v=1707846871)
Step 1 - Attach thread and wrap back leaving thread at the hook point
![](https://cdn.shopify.com/s/files/1/0713/6115/files/strippersglitter_-_2_of_13_480x480.jpg?v=1707846885)
Step 2 - Tied in your flash tail ON TOP of the hook shank back to the start of the bend
![](https://cdn.shopify.com/s/files/1/0713/6115/files/strippersglitter_-_3_of_13_480x480.jpg?v=1707846900)
Step 3 - Tie in marabou fibers over/around the flash tail and wrap forward to the mid shank
![](https://cdn.shopify.com/s/files/1/0713/6115/files/strippersglitter_-_4_of_13_480x480.jpg?v=1707846913)
Step 4 - Make a loop out of your thread^, and nip it at one end to create a strand to to cross rib your hackle
![](https://cdn.shopify.com/s/files/1/0713/6115/files/strippersglitter_-_5_of_13_480x480.jpg?v=1707846925)
![](https://cdn.shopify.com/s/files/1/0713/6115/files/strippersglitter_-_6_of_13_480x480.jpg?v=1707846939)
Step 5 - Prep your hackle by grabbing the tip and stroking the fibers back and tie in by the tip
![](https://cdn.shopify.com/s/files/1/0713/6115/files/strippersglitter_-_7_of_13_480x480.jpg?v=1707846951)
Step 6 - Tie in a long clump of Angel Hair after the hackle, wrapping back to the bend
![](https://cdn.shopify.com/s/files/1/0713/6115/files/strippersglitter_-_8_of_13_480x480.jpg?v=1707846964)
Step 7 - Wrap angel hair forward and and tie off on the top of the hook
![](https://cdn.shopify.com/s/files/1/0713/6115/files/strippersglitter_-_9_of_13_480x480.jpg?v=1707846984)
Step 8 - Pull the Angel Hair back and tie down as a wing
![](https://cdn.shopify.com/s/files/1/0713/6115/files/strippersglitter_-_10_of_13_480x480.jpg?v=1707846995)
Step 9 - Pull your Angel Hait back and palmer hackle forward to the cone
![](https://cdn.shopify.com/s/files/1/0713/6115/files/strippersglitter_-_11_of_13_480x480.jpg?v=1707847017)
Step 10 - Cross rib hackle with thread rib, wrapping carefully using a "wiggle" as you wrap to avoid binding hackle fibers. Tie off.
![](https://cdn.shopify.com/s/files/1/0713/6115/files/strippersglitter_-_12_of_13_480x480.jpg?v=1707847034)
Step 11 - Add Ice Dub Collar, tie off, glue, and trim thread